Pump-compressor pipes

Fiber pump-compressor pipes: complete victory over corrosion

Spheres of use

  • Injection wells of Reservoir Pressure Maintaining system.
  • Utilization (absorbing) wells.
  • Production wells with Centrifugal Pump System Installation.
  • Water-lifting wells; Gas lift wells.

SIE "Fiberglass Pipes Plant" the only Russian producer of fiberglass pump and compressor pipes with a depth of immersion of a fiberglass column to 3000 m and with a working pressure up to 27,6 MPas.

Specifications

Maximum depth, m 3000 м
Conditional internal pipes diameter 50, 63, 76, 100, 150, 200 мм
Maximum working pressure 27,6 МПа
Minimum safety factor for tightness не менее 2,3
Operating temperature range up to + 150 ° C, limitations
negative temperatures restrictions are absent
Maximum pipes length up to 9120 мм

  • Complete corrosion absence (material is inert to acids, alkalis, salts, hydrogen sulphide and oxygen-containing compounds);
  • The service life exceeds 50 years even while transporting corrosive liquids;
  • Paraffins, solid sediments and various salts deposits absence or significant reduction on the inner pipes surface due to the walls smoothness and low thermal conductivity;
  • Low hydraulic resistance due to a smooth inner surface;
  • Fiberglass refers to non-shielding (radio-transparent) materials.

Fiberglass pumping compressor tubes use provides

  • multiple increase in the operating time for pipes failure on a complicated well stock;
  • pressure drop decrease on column height, which allows using smaller diameter tubing in comparison with metal analogues;
  • columns maintenance and operation cost reduction;
  • tubing lifts number reduction;
  • corrosion inhibitors use need absence;
  • wells working condition research without raising tubing columns.

Pipe connection

The integral threaded connection "nipple-coupling" with "EUE 8rd API Long" thread corresponds to the "API 5B" requirements. The thread corresponds to the dimensions and the profile of the triangular thread of metal pumping compressor tubes in step of 8 threads per inch in accordance with GOST 632-80 and GOST 633-80. The main difference is the total thread glass fibre reinforced plastic pipes length is longer than metal analogs’ one.

Выполненные проекты

Video Gallery

Производство стеклопластиковых труб
Production of fiberglass pipes

Photo Gallery

Leave a request for calculating the cost of pipes